Home / Products / Non-Metallic Floor Hardener

Non-Metallic Floor Hardener

Mineral-aggregate dry-shake surface hardener for high-abrasion concrete floors without metallic content.

Dry-ShakeMineral AggregateRust-FreeWide Colours
DOSAGE4–8 kg/m²
APPLICATIONDry-shake
STRENGTH2× concrete
SHELF LIFE12 months

Overview

Mineral hardness. Without the rust.

Non-Metallic Floor Hardener is a pre-blended dry-shake surface hardener using corundum, quartz, or basalt aggregate to deliver high abrasion resistance without the rust-staining risk of iron-aggregate hardeners. Available in wide colour range.

Used where high abrasion resistance is required but iron-aggregate cannot be used – wet or humid environments, food-handling areas, and aesthetic industrial floors.

Key Features

  • Pre-blended cement + mineral aggregate
  • Iron-free – no rust staining
  • Dry-shake onto plastic concrete
  • Abrasion resistance 2× plain concrete
  • Wide colour range available
  • Suitable for wet and humid environments

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormPre-blended dry-shake powder
AggregateCorundum / quartz / basalt
ColourStandard + custom
Dosage4–8kg/m²
ApplicationDry-shake
Applications2 (split-shake)
Density2.20 ± 0.10g/cm³
Compressive strength≥ 70MPa
Flexural strength≥ 10MPa
Abrasion (BCA)AR1 / AR2
Rust stainingNone
Service temperatureUnlimited
Packaging25kg bag
StandardsEN 13813 · BS 8204-2

Applications

Where this product is used

Six typical site applications where our crews specify this product.

📦

Warehouse floors

Cost-effective abrasion-resistant warehouse flooring.

🚛

Logistics floors

Distribution centre floor hardening.

🏪

Retail floors

Aesthetic coloured floors.

🏭

Light industrial

Light industrial production floors.

🚿

Wet industrial

Humid environments where iron would rust.

🍞

Food handling

Iron-free hardener for food handling.