+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / Chemical Anchors

Chemical Anchors

Two-component injection resin cartridge system for high-load chemical anchoring of threaded rods and rebar.

High LoadCracked ConcreteETA ApprovedInjection-Style
CARTRIDGE380–600 ml
WORKING6–10 min
CURE45 min
SHELF LIFE18 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Anchored chemically. Higher load. Tighter spacing.

Chemical Anchors are a two-component vinyl-ester or epoxy injection resin cartridge system for high-load chemical anchoring of threaded rods and rebar into concrete, masonry, and stone substrates. Higher load capacity and closer edge/spacing distances than mechanical anchors.

Standard for structural connections, base-plate fixings, post-installed rebar, and seismic-zone anchorage.

Key Features

  • Two-component resin/hardener cartridge
  • Static mixing nozzle ensures correct mix ratio
  • ETA approved for cracked and uncracked concrete
  • Higher load capacity than mechanical anchors
  • Allows closer edge distance and anchor spacing
  • Seismic-zone approved variants available

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormTwo-component cartridge–
ChemistryVinyl ester / Pure epoxy–
Cartridge size380 / 410 / 600ml
ColourGrey–
Working time6–10min
Cure time45min
Full cure12hours
Bond strength≥ 12MPa
Tensile capacityPer ETAkN
Anchor sizesM8 to M30–
Drill hole tolerancePer anchor diameter–
Service temperature−40 to +80°C
Storage+5 to +25°C
StandardsETA-approved · EN 1504-6–

Applications

Where this product is used

Six typical site applications where our crews specify this product.

🔩

Base plate fixings

Structural base plate anchorage.

🏗️

Post-installed rebar

Rebar dowelling for structural extensions.

🌉

Bridge connections

Bridge structural connection anchorage.

⚡

MEP fixings

Heavy-duty MEP fixings.

🏭

Industrial anchors

Industrial equipment foundation anchorage.

🚧

Crash barrier fixings

Vehicle restraint and crash barrier anchorage.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →