Home / Products / Cementitious Non-Shrink Grout

Cementitious Non-Shrink Grout

Pre-blended cementitious non-shrink grout for base plate, machine, and structural anchor grouting.

Non-ShrinkHigh FlowIron-FreeEN 1504-6
APPLICATION10–100 mm gap
STRENGTH (28d)≥ 65 MPa
FLOWSelf-levelling
SHELF LIFE12 months

Overview

Fills the gap. Without shrinking.

Cementitious Non-Shrink Grout is a pre-blended, iron-free cementitious non-shrink grout for filling annular gaps around base plates, machine foundations, anchor bolts, and precast structural connections. Shrinkage compensation ensures continuous bearing contact at the interface.

Used for grouting under machine base plates, around anchor bolts, and in structural connections requiring shrinkage compensation.

Key Features

  • Pre-blended powder – just add water
  • Non-shrink, shrinkage-compensated
  • Self-levelling free-flow consistency
  • Iron-free – no rust staining
  • High early and ultimate strength
  • Sulphate and chloride resistant

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormPre-blended cementitious powder
CompositionCement + aggregate + shrinkage compensator
ColourGrey
Mixing water13–15%
Pot life30–45min
Flow (cone)≥ 30sec
Compressive strength (28d)≥ 65MPa
Flexural strength (28d)≥ 9MPa
Expansion (early)+0.05 to +0.4%
Shrinkage (drying)≤ 0.05%
Application thickness10–100mm
Wet density2.30 ± 0.05g/cm³
Packaging25kg bag
StandardsEN 1504-6 · ASTM C1107 Grade C

Applications

Where this product is used

Five typical site applications where our crews specify this product.

🔩

Anchor bolt grouting

Grouting around structural anchor bolts.

⚙️

Machine base plates

Precision grouting under industrial machine bases.

🏗️

Precast connections

Filling connections between precast elements.

🌉

Bearing pads

Bridge bearing pad seating and grouting.

🚧

Column base grouting

Steel column to concrete foundation grouting.