+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / Bituminous Liquid Coating

Bituminous Liquid Coating

Cold-applied bitumen emulsion for below-grade waterproofing and damp-proofing of foundations.

Cold AppliedBelow-GradeEasy ApplicationEconomical
SOLIDS~55%
COVERAGE1.0–1.5 kg/m²
CURE (TOUCH-DRY)4–8 hours
SHELF LIFE12 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Below-grade protection. Cold-applied, no flame.

Bituminous Liquid Coating is a cold-applied bitumen emulsion for damp-proofing and waterproofing of below-grade concrete and masonry substrates. The water-based emulsion eliminates flame and solvent hazards while delivering reliable below-grade protection at a fraction of the cost of sheet membranes.

Used on foundation walls, retaining walls, and ground beams where back-fill protection is the primary requirement.

Key Features

  • Cold-applied water-based bitumen emulsion
  • No flame, no solvents – site safe
  • Brush, roller, or spray application
  • Excellent adhesion to damp concrete
  • Provides damp-proofing and back-fill protection
  • Cost-effective alternative to sheet membranes

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormSingle-component bitumen emulsion–
ColourBlack–
Solids content~55%
Density1.05 ± 0.05g/cm³
Coverage per coat0.5–0.75kg/m²
Total system coverage1.0–1.5kg/m²
Touch-dry time4–8hours
Recoat interval8–12hours
Full cure5–7days
Service temperature−10 to +70°C
Flash pointNon-flammable (water-based)–
Application temperature+5 to +40°C
Packaging5 / 20kg
StandardsASTM D1227 · BS 6949–

Applications

Where this product is used

Five typical site applications where our crews specify this product.

🏠

Foundation walls

Below-grade damp-proofing of concrete foundation walls.

🌉

Retaining walls

Back-fill side protection for earth-retaining structures.

🏛️

Ground beams

Underside and side protection of ground-level beams.

🚇

Underground tanks

External protection of buried tanks and chambers.

🛣️

Bridge abutments

Below-grade protection of bridge abutment structures.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →