+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / Acrylic Liquid Waterproofing

Acrylic Liquid Waterproofing

Water-based acrylic waterproofing for cost-effective, environmentally friendly seamless protection.

Water-BasedLow VOCEasy ApplicationReflective
SOLIDS~60%
COVERAGE1.5–2.0 kg/m²
CURE (TOUCH-DRY)2–3 hours
SHELF LIFE12 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Easy. Economical. Environmentally smart.

Acrylic Liquid Waterproofing is a water-based acrylic emulsion coating delivering reliable, cost-effective seamless protection. Low VOC content and water clean-up make it the preferred choice for occupied buildings, schools, and healthcare facilities where solvent emissions must be minimised.

Used across maintenance and refurbishment contracts where speed, safety, and low odour are priorities.

Key Features

  • Water-based – low VOC, low odour, easy clean-up
  • Reinforced with elastomeric acrylic polymers
  • White colour reflects solar radiation
  • Brush, roller, or spray application
  • Resistant to alkalis, pollution, and weathering
  • Cost-effective for large-area applications

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormSingle-component water-based liquid–
ColourWhite / Grey / Tile Red–
Solids content~60%
Density1.30 ± 0.05g/cm³
Viscosity8000–12000mPa·s
Coverage per coat0.75–1.0kg/m²
Total system coverage1.5–2.0kg/m²
Touch-dry time2–3hours
Recoat interval6–8hours
Tensile strength1.5–2.5MPa
Elongation at break150–250%
Service temperature−10 to +80°C
Packaging5 / 20kg
StandardsASTM C836 · EN 1504-2–

Applications

Where this product is used

Six typical site applications where our crews specify this product.

🏢

Refurbishment roofs

Cost-effective recoating of existing roof systems.

🏫

Schools & hospitals

Low-odour application for occupied sensitive buildings.

🌡️

Cool-roof coatings

Reflective white finish reduces roof surface temperature.

🚿

Internal wet areas

Bathroom and kitchen waterproofing where low-VOC is required.

🏠

Residential roofs

Villa and apartment block roof waterproofing.

🛒

Retail premises

Roof recoating while shops remain operational.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →