+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / EpoxyBond M2

EpoxyBond M2

Two-component structural epoxy bonding agent for permanent old-to-new concrete bond.

Structural BondASTM C881 Type V100% SolidsTwo-Component
RATIO2 : 1 by volume
OPEN TIME30–60 min
BONDConcrete failure
SHELF LIFE24 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Structural-grade bond. Stronger than the parent.

EpoxyBond M2 is a two-component, solvent-free epoxy bonding agent for structural connection of new concrete or mortar to existing hardened concrete. The cured film delivers tensile and shear bond strengths that exceed the parent concrete — failure occurs in the substrate, never at the bond line.

Specified per ASTM C881 Type V and supplied across UAE projects for any repair where the bond interface will be subject to tensile, shear, or vibration loads — from bridge deck overlays to industrial floor patching.

Key Features

  • Two-component structural epoxy — 100% solids
  • Bond strength exceeds parent concrete
  • ASTM C881 Type V certified
  • Solvent-free — no shrinkage
  • Compatible with wet and dry substrates
  • Tolerates wide range of substrate conditions

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormTwo-component (resin + hardener)—
Mix ratio2 : 1—
ColourAmber / grey—
Mixed density1.10 ± 0.05g/cm³
Mixed viscosity5000 ± 1000mPa·s
Pot life30–60min
Open time60–90min
Coverage0.3–0.5kg/m²
Initial cure12hours
Full cure7days
Compressive strength≥ 75MPa
Tensile bondConcrete failure—
Service temperature−30 to +80°C
StandardsASTM C881 Type V · EN 1504-4—

Applications

Where EpoxyBond M2 is used

Six typical site applications where our crews specify this product.

🏗️

Structural repair

Bond coat for load-bearing concrete repair.

🌉

Bridge repair

Bonding new concrete overlays to bridge decks.

⛓️

Post-tensioned repairs

Bonding for stressed structural element repair.

🏭

Industrial floor repair

Heavy-duty industrial slab repair bond coat.

🚧

Crash barrier repair

Restoring crash-damaged structural elements.

⬇️

Foundation jacketing

Bond coat for foundation jacketing operations.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →