+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / CFRP Saturating Epoxy

CFRP Saturating Epoxy

Two-component structural epoxy resin for wet lay-up impregnation of CFRP fabrics.

Wet Lay-UpTwo-ComponentTixotropic OptionEN 1504-4
RATIO100 : 30 by weight
POT LIFE30–45 min
CURE7 days
SHELF LIFE24 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Saturates the fabric. Bonds it to the structure.

CFRP Saturating Epoxy is a two-component, solvent-free structural epoxy resin specifically formulated for wet lay-up impregnation of carbon, glass, and aramid fiber fabrics. The low-viscosity formulation fully wets out the fibers while providing structural bond strength to the substrate.

Used exclusively with CFRP fabric systems for in-situ structural strengthening.

Key Features

  • Two-component structural epoxy – 100% solids
  • Specifically formulated for fiber wet-out
  • Low-viscosity for fabric saturation
  • Tixotropic variant for overhead application
  • EN 1504-4 certified
  • Compatible with all common CFRP fabric weights

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormTwo-component (resin + hardener)–
Mix ratio100 : 30–
ColourAmber / clear–
Mixed density1.10 ± 0.05g/cm³
Mixed viscosity500–800mPa·s
Pot life30–45min
Open time60min
Coverage per layer0.7–1.5kg/m²
Initial cure24hours
Full cure7days
Tensile strength≥ 35MPa
Compressive strength≥ 70MPa
Service temperature−30 to +60°C
StandardsEN 1504-4 · ASTM C881–

Applications

Where this product is used

Six typical site applications where our crews specify this product.

🏗️

CFRP fabric wet-out

Impregnation of carbon fiber fabrics.

🧱

GFRP wet-out

Wet-out of glass fiber fabrics for masonry.

🏛️

Substrate bonding

Bond coat between substrate and fiber composite.

⛓️

Crack injection

Low-viscosity grade for crack injection.

🌉

Bridge strengthening

Component of bridge structural strengthening.

🏭

Industrial strengthening

Industrial facility structural upgrades.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →