+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / CFRP Laminate Plates

CFRP Laminate Plates

Pre-cured pultruded carbon fiber laminate plates for flexural strengthening of beams and slabs.

Pre-CuredPultruded≥ 2800 MPaFast Installation
THICKNESS1.2 / 1.4 mm
WIDTH50–120 mm
TENSILE≥ 2800 MPa
SHELF LIFE60 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Pre-cured strength. On-site speed.

CFRP Laminate Plates are pre-cured unidirectional carbon fiber reinforced polymer laminate strips, manufactured by pultrusion. Installed by bonding with structural epoxy adhesive to the tension surfaces of concrete elements.

Preferred for long-line strengthening of beam and slab soffits where multiple repetitive installations make pre-cured laminates more time-efficient than fabric systems.

Key Features

  • Pre-cured pultruded laminate
  • Tensile strength ≥ 2800 MPa
  • Modulus of elasticity ≥ 165 GPa
  • Rapid installation by epoxy bonding
  • Consistent fiber alignment and resin content
  • Available in standard widths

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormPre-cured CFRP laminate strip–
Fiber typePAN carbon–
Resin matrixEpoxy–
Thickness options1.2 / 1.4mm
Width options50 / 80 / 100 / 120mm
Standard length100m roll
Fiber content (vol)≥ 68%
Tensile strength≥ 2800MPa
Modulus of elasticity≥ 165GPa
Elongation at break≥ 1.7%
Density1.55 ± 0.05g/cm³
Bond strength≥ 30MPa
InstallationEpoxy bonding–
StandardsEN 1504-4 · ACI 440.2R–

Applications

Where this product is used

Five typical site applications where our crews specify this product.

🏗️

Beam flexural strengthening

Tension-face bonding for beam capacity upgrade.

🌉

Bridge girder upgrade

Live-load capacity upgrade for bridges.

🏭

Industrial floor upgrade

Capacity upgrade for heavy-load industrial floors.

🛣️

Crash damage repair

Restoration of impact-damaged beams.

🏛️

Heritage strengthening

Discreet strengthening of historic structures.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →