+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / Roller-Applied Epoxy Coating

Roller-Applied Epoxy Coating

Cost-effective two-component epoxy coating applied by roller for industrial floor protection and dust-proofing.

Roller-AppliedDust-ProofSolvent-FreeTwo-Component
THICKNESS150–300 μm
COVERAGE0.25–0.40 kg/m²
FOOT TRAFFIC24 hours
SHELF LIFE12 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Sealed. Dust-proofed. Cost-effective protection.

Roller-Applied Epoxy Coating is a two-component, low-viscosity epoxy coating applied by roller at 150–300 microns thickness. Provides effective dust-proofing, chemical resistance, and abrasion protection at a fraction of the cost of high-build systems.

The standard specification for warehouse floors, garages, workshops, and industrial floors where mechanical loading is moderate.

Key Features

  • Roller, brush, or spray application
  • Low-cost dust-proofing and protection
  • Solvent-free – 100% solids variant
  • Good chemical and abrasion resistance
  • Wide colour range
  • Compatible with quartz broadcast for slip resistance

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormTwo-component liquid–
Mix ratio4 : 1–
ColourWide range (RAL)–
Mixed density1.45 ± 0.05g/cm³
Pot life30–45min
Coverage per coat0.15–0.20kg/m²
Total system0.25–0.40kg/m²
Touch-dry6–8hours
Foot traffic24hours
Full cure7days
Compressive strength≥ 60MPa
Shore D hardness≥ 70–
Service temperature−30 to +80°C
StandardsEN 1504-2 · EN 13813–

Applications

Where this product is used

Six typical site applications where our crews specify this product.

🏭

Warehouse floors

Cost-effective sealing of warehouse floors.

🚗

Workshops & garages

Workshop and vehicle service floors.

🏗️

Light industrial

Light industrial production floors.

📦

Logistics floors

Distribution centre floors.

⚙️

Equipment rooms

Plant room floors.

🏪

Back-of-house

Retail back-of-house floors.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →