+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / Anti-Static (ESD) Floor Coating

Anti-Static (ESD) Floor Coating

Conductive epoxy floor coating dissipating static charge for electronics manufacturing and explosive-atmosphere environments.

ESD CompliantConductive MeshSelf-LevellingIEC 61340-5-1
THICKNESS2–3 mm
RESISTANCE10⁶–10⁹ Ω
FOOT TRAFFIC24 hours
SHELF LIFE12 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Dissipates static. Protects electronics.

Anti-Static Floor Coating is a self-levelling conductive epoxy floor system that dissipates electrostatic charge through a conductive copper-mesh underlay connected to building earth. Electrical resistance is controlled to 10⁶–10⁹ Ω.

Required for electronics manufacturing, server rooms, explosive-atmosphere areas, and operating theatres.

Key Features

  • IEC 61340-5-1 compliant
  • Conductive copper-mesh earthing system
  • Self-levelling smooth finish
  • Wide colour range available
  • Chemical and abrasion resistant
  • Compatible with clean-room protocols

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormTwo-component conductive epoxy–
Mix ratio4 : 1–
ColourStandard ESD colours–
System thickness2–3mm
Electrical resistance10⁶ – 10⁹Ω
Mixed density1.55 ± 0.05g/cm³
Pot life30min
Coverage2.5–3.5kg/m² @ 2 mm
Foot traffic24hours
Full cure7days
Compressive strength≥ 60MPa
Shore D hardness≥ 75–
EarthingCopper mesh at primer stage–
StandardsIEC 61340-5-1 · ANSI/ESD S20.20–

Applications

Where this product is used

Six typical site applications where our crews specify this product.

💻

Electronics manufacturing

Static-sensitive electronics assembly.

🖥️

Server rooms

Data centre flooring.

💥

Explosive atmospheres

ATEX-zoned areas.

🏥

Operating theatres

Healthcare facilities requiring ESD.

🚀

Aerospace facilities

Aerospace assembly clean rooms.

🔬

Laboratory floors

Research laboratories.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →