+971 55 770 5568 [email protected] Dubai, UAE

Sustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE PropertieSustainable Building Materials UAE TrendEmergency Repair Savings: Build an Unexpected Repair Budget for UAE PropertiesHidden Moisture Detection & Moisture Problem Identification Guide UAE BuildingsApartment Maintenance Responsibility & Tenant Building CarWarehouse Maintenance Guide: Complete Industrial Building Protection for UAE Propertie
Free Site Survey

Home / Products / Epoxy Bonding Agent

Epoxy Bonding Agent

Two-component structural epoxy bonding agent for permanent old-to-new concrete bond.

Structural BondASTM C881 Type V100% SolidsTwo-Component
RATIO2 : 1 by volume
OPEN TIME30–60 min
BONDConcrete failure
SHELF LIFE24 months
Free Site Survey →
↓ Download Datasheet (PDF)

Overview

Structural-grade bond. Stronger than the parent.

Epoxy Bonding Agent is a two-component, solvent-free epoxy for structural connection of new concrete or mortar to existing hardened concrete. The cured film has tensile and shear bond strengths that exceed the parent concrete.

Essential for any repair where the bond interface will be subject to tensile, shear, or vibration loads. Specified per ASTM C881.

Key Features

  • Two-component structural epoxy – 100% solids
  • Bond strength exceeds parent concrete
  • ASTM C881 Type V certified
  • Solvent-free – no shrinkage
  • Compatible with wet and dry substrates
  • Tolerates wide range of substrate conditions

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormTwo-component (resin + hardener)–
Mix ratio2 : 1–
ColourAmber / grey–
Mixed density1.10 ± 0.05g/cm³
Mixed viscosity5000 ± 1000mPa·s
Pot life30–60min
Open time60–90min
Coverage0.3–0.5kg/m²
Initial cure12hours
Full cure7days
Compressive strength≥ 75MPa
Tensile bondConcrete failure–
Service temperature−30 to +80°C
StandardsASTM C881 Type V · EN 1504-4–

Applications

Where this product is used

Five typical site applications where our crews specify this product.

🏗️

Structural repair

Bond coat for load-bearing concrete repair.

🌉

Bridge repair

Bonding new concrete overlays to bridge decks.

⛓️

Post-tensioned repairs

Bonding for stressed structural element repair.

🏭

Industrial floor repair

Heavy-duty industrial slab repair bond coat.

🚧

Crash barrier repair

Restoring crash-damaged structural elements.

Explore Our Services

Engineered solutions for every building.

View All Services →

Engineered Products

Materials trusted across our projects.

View All Products →