Home / Products / Migrating Corrosion Inhibitor (MCI)

Migrating Corrosion Inhibitor (MCI)

Topical migrating corrosion inhibitor that diffuses through concrete to passivate embedded reinforcement.

Surface-AppliedMigrates Through ConcreteService-Life ExtensionPenetrates 100mm+
PENETRATIONUp to 100 mm
COVERAGE0.3–0.5 kg/m²
APPLICATIONSpray or roller
SHELF LIFE12 months

Overview

Stops corrosion. From the outside in.

Migrating Corrosion Inhibitor is a surface-applied liquid that penetrates hardened concrete and migrates by vapour and liquid diffusion to reach embedded reinforcement, forming a protective film on the steel surface.

The non-invasive alternative to full concrete repair on structures with widespread but early-stage corrosion.

Key Features

  • Surface-applied – no concrete removal
  • Migrates through concrete
  • Penetrates up to 100 mm of cover
  • Forms protective film on rebar
  • Suppresses anodic and cathodic corrosion
  • Extends service life 5–15 years per treatment

Technical Specs

Technical Specifications

All values measured at 23°C unless noted. Full test data available in the datasheet.

PropertyValueUnit
FormSingle-component liquid amine inhibitor
ColourPale amber
Density1.05 ± 0.05g/cm³
pH10–11
Solids content30 ± 5%
Coverage0.3–0.5kg/m²
Number of coats2–3
Recoat4–6hours
PenetrationUp to 100mm
ApplicationSpray / roller / brush
Application temperature+5 to +35°C
Service temperature−30 to +80°C
Packaging5 / 20L
StandardsASTM G109 · NACE TM-0169

Applications

Where this product is used

Six typical site applications where our crews specify this product.

🌉

Bridge structures

Service life extension of bridge decks and beams.

🅿️

Car park decks

Multi-level car park slab protection.

🏠

Balconies & terraces

Residential balcony corrosion mitigation.

🌊

Marine structures

Coastal building service life extension.

🏭

Industrial structures

Industrial facility service life extension.

🏛️

Heritage buildings

Non-invasive protection of heritage concrete.